Pre Made VDL Plastic Manifold with 3/4″ Solenoids

Product Description VDL Plastic Manifold This is a pre-made manifold using 32mm VDL Plastic pipe fittings all glued and tested prior to posting. Create multiple feeds out from 1 incoming water supply using solenoid valve on each output. Creating 4 6 8 or 12 zones. When the solenoids are connected to any 24VAC Irrigation Controller you have the flexability to controll various watering schedules for your garden. Each manifold has a drain point for winterisation.The manifoild comes with a braided flexible hose with a brass snap fitting so will snap fit onto all male snap fittings. Each manifold has an isolation vave and double check valve.The solenoids are pre wired up so you only need to replicate the wiring into your controller. Comes with option of 16mm/20mm outlets, or half and half. Each manifold comes with: Snap fitting onto your water supply. 1mt Braided Hose with snap connector Isolation Valve All pre wired and tested before dispatch. VDL Pipe clips suplied ( You will need screws and raw plugs) Bermad 3/4″ Solenoid Valves 24VAC 10 Bar Rating 4,6,8 or 12 Zone Options Use with any 24VAC Controller Due to this being a custom build, this item is not refundable . Available in 4 Zone 6 Zone 8 Zone 12 Zone Please note these manifolds are suitable for irrigation where the pipe work is above ground and a double check valve must be fitted. ( Most new tap are fitted as standard but we advise on having your tap and manifold with a double check valve.) If an Irrigation System is required where the pipe work is to be buried a tank and pump operation will be required .